46 Range Watertight surface-mounting distribution and automation boards

CHARACTERISTICS: boxes equipped with inserts pre-assembled in the slots, to speed up the configuration of the board. Doors equipped with functional grid of reference for fixing the devices. From board GW46002F to board GW46006F it is possible to fix the panels with windows or blank (1 or 2 modules) directly in the seats housed in the vertical walls of the boards; for the board GW46007F use uprights GW46439F. Impact resistance: IK10 according to EN 62262.
ACCESSORIES SUPPLIED: 4 reversible brackets with relative screws for fixing back-mounting plates or uprights for modular devices.
NOTES: Dispersible power calculated according to CEI 23-49.
Dispersible power A (W): board configuration with back-mounting plate (as far back as possible).
Dispersible power B (W): board configuration with DIN rails + panels with windows.
The nominal dimensions in the table above refer to the external size of the boards; for the real outer dimensions refer to the technical data sheet downloadable from professionals website GEWISS or to the technical section of this catalogue.
For applications in the photovoltaic environment, use the surface-mounting brackets - code GW44621.

ACCESSORIES SUPPLIED: boxes equipped with inserts pre-assembled in the slots, to speed up the configuration of the board. For the transparent door version: GWT 650°C. From board GW46202F to board GW46206F it is possible to fix the panels with windows or blank (1 or 2 modules) directly in the seats housed in the vertical walls of the boards; for the board GW46207F use uprights GW46439F. Impact resistance of the bottom: IK10 according to EN 62262.
ACCESSORIES SUPPLIED: 4 reversible brackets with relative screws for fixing back-mounting plates or uprights for modular devices.
NOTES: Dispersible power calculated according to CEI 23-49.
Dispersible power A (W): board configuration with back-mounting plate (as far back as possible).
Dispersible power B (W): board configuration with DIN rails + panels with windows.
The nominal dimensions in the table above refer to the external size of the boards; for the real outer dimensions refer to the technical data sheet downloadable from professionals website GEWISS or to the technical section of this catalogue.
For applications in the photovoltaic environment, use the surface-mounting brackets - code GW44621.

NOTE: spare blank doors as compatible with the respective back plates of the previous boards of the 46QP range.

NOTE: spare transparent doors as compatible with the respective back plates of the previous boards of the 46QP range.

ACCESSORIES SUPPLIED: screwcaps, threaded pins or reversible squares with the relative bolts and screws for fixing the back-mounting plates or uprights for modular devices.
GW46034, GW46035, GW46036, GW46037 with perforated bottom equipped with flange for cables to pass through.
NOTES: Dispersible power calculated according to CEI 23-49.
For the front configuration (via panels and DIN rails), it is necessary to use the uprights.
Dispersible power A (W): board configuration with back-mounting plate (as far back as possible).
Dispersible power B (W): board configuration with DIN rails + panels with windows.
The technical and functional characteristics, and the nominal values, refer to vertical installation only.
APPLICATIONS: for indoor use (e.g. in industrial systems, on machines, etc.).
The nominal dimensions LxHxD in the table above refer to the external size of the boards.
For the real outer dimensions LxHxD refer to the technical data sheet downloadable from professionals website GEWISS or to the technical section of this catalogue.

ACCESSORIES SUPPLIED: screwcaps, threaded pins or reversible squares with the relative bolts and screws for fixing the back-mounting plates or uprights for modular devices.
GW46234, GW46235, GW46236, GW46237 with perforated bottom equipped with flange for cables to pass through.
NOTES: Dispersible power calculated according to CEI 23-49.
For the front configuration (via panels and DIN rails), it is necessary to use the uprights.
Dispersible power A (W): board configuration with back-mounting plate (as far back as possible).
Dispersible power B (W): board configuration with DIN rails + panels with windows.
The technical and functional characteristics, and the nominal values, refer to vertical installation only.
APPLICATIONS: for indoor use (e.g. in industrial systems, on machines, etc.).
The nominal dimensions LxHxD in the table above refer to the external size of the boards.
For the real outer dimensions LxHxD refer to the technical data sheet downloadable from professionals website GEWISS or to the technical section of this catalogue.

ACCESSORIES SUPPLIED: screwcaps, threaded pins or reversible squares with the relative bolts and screws for fixing the back-mounting plates or uprights for modular equipment.
GW46054, GW46056 with perforated bottom equipped with flange for cables to pass through.
NOTES: Dispersible power calculated according to CEI 23-49.
For the front configuration (via panels and DIN rails), it is necessary to use the uprights.
Dispersible power A (W): board configuration with back-mounting plate (as far back as possible).
Dispersible power B (W): board configuration with DIN rails + panels with windows.
The technical and functional characteristics, and the nominal values, refer to vertical installation only.
The nominal dimensions LxHxD in the table above refer to the external size of the boards.
For the real outer dimensions LxHxD refer to the technical data sheet downloadable from professionals website GEWISS or to the technical section of this catalogue.
APPLICATIONS: for indoor use, in areas that are frequently cleaned with water jets for reasons of hygiene (e.g. industrial kitchens, butchers' shops, etc.).

NOTES: for further information about the distances between board door, inner door and back-mounting plate, refer to the dimensional data in the technical catalogue.
CHARACTERISTICS: these are reversible (for the technical details refer to the dedicated section in the technical catalogue).

NOTES: for further information about the distances between board door, inner door and back-mounting plate, refer to the dimensional data in the technical catalogue. The use of the metal inner door in the boards of the 46QP range requires the earth pin to be connected to the relative PE protection conductor only if non-class 2 devices are assembled on it.
CHARACTERISTICS: these are reversible (for the technical details refer to the dedicated section in the technical catalogue).

CHARACTERISTICS: captive panel 1/4 turn sealing screws.
GW46420F, GW46421F, GW46422F, GW464223F, possibility to fix directly on the inner walls of the polyester boards.
ACCESSORIES SUPPLIED: fixing accessories. Complete with DIN rail.
NOTES: in all boards, the panel GW46424F can be fixed only with uprights GW46439F.

CHARACTERISTICS:
GW46425F, GW46426F, GW46427F, GW46428F, GW46475F, GW46476F, GW46477F, GW46478F possibility to fix directly on the inner walls of the polyester boards. captive panel 1/4 turn sealing screws.
in all boards, the panel GW46429F and GW46479F can be fixed only with uprights GW46439F.
ACCESSORIES SUPPLIED: fixing accessories.

ACCESSORIES SUPPLIED: the uprights are provided with a kit with 4 inserts to be inserted in the seats located on the lower and upper horizontal surfaces. The position of the seats where the inserts have to be housed is shown on the instruction sheet inside the 46QP boards. The insert is fixed in the seat through the expansion of the plate located inside the insert, using a pin with diameter 4 mm. The uprights are installed using the 4 brackets provided with the 46QP boards.
APPLICATIONS: the uprights make it possible to implement extractable frames by using: panels without and with windows, perforated or non-perforated plate with height of 1 or 2 modules, MCCB or switch disconnector kits.

ACCESSORIES SUPPLIED: accessories for fixing to panel brackets.
NOTES: To use the DIN rails without the relative blank panel, use the GW46524F kit.
To restore the minimum degree of protection of the open door board, use the relative inner door.

APPLICATIONS: suitable for use with the GWFIX 100 system.
ACCESSORIES SUPPLIED: accessories for fixing to panel brackets.
NOTES: the use of the double DIN rails GW46531F, GW46532F, GW46533F, GW46534F prevents the positioning of the vertical trunking.
To use the DIN rails without the relative blank panel, use the GW46524F kit.
To restore the minimum degree of protection of the open door board, use the relative inner door.

CHARACTERISTICS: panels with windows H=45mm; captive and sealing 1/4 turn screws; Fixed with uprights.
Pre-arrangement for vertically positioned devices. Halogen-free plastic material in accordance with EN 60754-2 (CEI EN 50267-2-2).
ACCESSORIES SUPPLIED: fixing accessories.
NOTES: the MTX 160c and MTX 160 (both 3P and 4P) must be fixed to the DIN rail using the special brackets contained in the GWD8261 kit.
The MTX 250 (both 3P and 4P) require the GWD8262 kit.
The coupling of the MTX moulded-case devices - and relative residual current device - on the DIN rail requires the use of special brackets that can be found in the appropriate section of the catalogue.
You are advised to always insert a blank panel above the moulded-case/switch-disconnector kit, to facilitate the cord positioning in the case of cord entry from the bottom.
The MSS switch-disconnectors cannot be installed together with MTX moulded-case devices on a single DIN rail from the kit, as they are of differing depths.
The peak current of the one-way switch indicated (in line with the presumed short-circuit current in the installation point) must NOT be greater than 17kA.
The presumed short-circuit current in the power supply line of the main switch of the board must NOT be greater than 10kA.

NOTES: for further information relating to the maximum applicable loads, see the table on the corresponding pages of the technical catalogue.

NOTES: to install devices, use nut and clips GW46450.
for further information relating to the maximum applicable loads, see the table on the corresponding pages of the technical catalogue.

NOTES: for further information relating to the maximum applicable loads, see the table on the corresponding pages of the technical catalogue.

NOTES: Use nut and clips GW46450 to install components

NOTES: to install non-standard devices and/or moulded-case devices.

CHARACTERISTICS: isolating technopolymer.
APPLICATIONS: correctly installed, makes it possible to restore original IP degree and double insulation of 46QP range boards in case of direct fixing of the board to the wall by drilling the back plate and without using the set of 4 steel brackets.

CHARACTERISTICS: To restore the double insulation and original IP degree of the boards in case of indirect fixing to the wall. Suitable also for 46QP photovoltaic application.

CHARACTERISTICS: fixed on the back of the boards.
APPLICATIONS: for applications of the 46QP boards on poles from 60 to 80mm and, by means of a banding (not included with the accessories supplied), from 80 to 200mm. To restore the double insulation and original IP degree of the boards in case of indirect fixing to the wall. Suitable also for 46QP photovoltaic application.
ACCESSORIES SUPPLIED: 2 pieces. For the correct use of the kit, see the instructions sheet.

CHARACTERISTICS: fixing on the board uprights. In the boards of size 3, 4, 5 and 6, vertical trunking support up to (LxH) 60x60 mm and horizontal trunking up to (LxH) 60x40 mm, while for boards of size 7, vertical and horizontal trunking support up to (LxH) 40x60 mm.
APPLICATIONS: for boards of at least 405x500 mm.
NOTES: the kit for wiring trunking assembly is used to create flat horizontal and vertical routes.
ACCESSORIES SUPPLIED: 2 trunking fixing brackets, 2 DIN rail assembly brackets and 6 - 4x6 mm screws. For the use of the kit, see the instructions sheet.

NOTES: use the GW46524F kit to assembly the 18; 24; 28; 36 F&E DIN rails without the specific blanck panel.
To restore the minimum degree of protection of the open door board, use the relative inner door.

APPLICATIONS: allows the 46QP boards to be transported.
NOTES: the handle kit can be used simultaneously with the pole support kit or the set of brackets, for wall mounting.

CHARACTERISTICS: clip fixing on DIN perforated front panels.

APPLICATIONS: compensation of the different installation depths on DIN rail EN 50022 of the modular devices (90 Range) and moulded case devices (MTX/M 160c - MTX/E 160 - MTX/M 250 range).

APPLICATIONS: can be used on enclosures starting with the 515x650x250 mm dimension.

APPLICATIONS: allows the combined installation of the back-mounting plate and the frame.
ACCESSORIES SUPPLIED: fixing screws; 4 inserts.

APPLICATIONS: allows you to extend the possibility of adding functional accessories to all the slots of the 46QP boards.
NOTES: the inserts are inserted in the free slots of the 46QP boards and are expanded in the housing, using a small dowel with a diameter of 4mm.
One insert kit package contains 10 inserts.

APPLICATIONS: for boards 46QP, QX, QM e CEP.

APPLICATIONS: for boards 46QP, QX, QM e CEP.

APPLICATIONS: for boards 46QP, QX, QM e CEP.
ACCESSORIES SUPPLIED: 2 keys.
NOTES: All the keys and relative locks with the same product code are identical.

CHARACTERISTICS: the fan takes in air from the outside and introduces it into the distribution board, creating a slight overpressure that prevents foreign particles from entering. Max fan capacity 60 m³/h. Absorbed power equal to 20 W.
APPLICATIONS: forced ventilation in critical thermal conditions.
ACCESSORIES SUPPLIED: drilling template.

ACCESSORIES SUPPLIED: drilling template.

CHARACTERISTICS: can be inserted in all Gewiss enclosures from dimension 405x500x200 mm upwards.

APPLICATIONS: possibility to create 1, 2, 3 and 4-pole distributing frames.
CHARACTERISTICS: terminal tightening torque: input cable 4 Nm, output cables 1.5 Nm.

CHARACTERISTICS: the indicated connection capacity is "per pole" and refers to the fitting of cables with "test prods".
NOTES: products bearing the IMQ quality mark.

CHARACTERISTICS: terminal tightening torque: input cables 4 Nm, output cables 1.5 Nm.
the indicated connection capacity is "per pole" and refers to the fitting of cables with "test prods".
NOTES: products bearing the IMQ quality mark.

ACCESSORIES SUPPLIED: installation clip on DIN rail.

CHARACTERISTICS: Doors equipped with functional grid of reference for fixing the devices. Impact resistance: 5 J.
ACCESSORIES SUPPLIED: frame for semi-flush-mounting installations, screwcap for double insulation, triangle key.
NOTES: The technical and functional characteristics, and the nominal values, refer to vertical installation only.
Dispersible power calculated according to CEI 23-49:
Dispersible power A (W): configuration of the board with relative back-mounting plate.
Dispersible power B (W): configuration of the board with relative panel with windows.

CHARACTERISTICS: Doors equipped with functional grid of reference for fixing the devices. Impact resistance: 5 J.
ACCESSORIES SUPPLIED: frame for semi-flush-mounting installations, screwcap for double insulation, triangle key.
NOTES: The technical and functional characteristics, and the nominal values, refer to vertical installation only.
Dispersible power calculated according to CEI 23-49:
Dispersible power A (W): configuration of the board with relative back-mounting plate.
Dispersible power B (W): configuration of the board with relative panel with windows.

REMARQUES: puissance dissipable déterminée selon la norme IEC 60670-24, obtenue en plaçant des plastrons indiqués dans les coffrets appropriés.

CHARACTERISTICS: equipped with functional grid for fixing devices.

ACCESSORIES SUPPLIED: fixing uprights and DIN rails, module masks, user labels.

APPLICATIONS: used to maintain the double insulation and the original IP degree of protection of the boxes, containers and other GEWISS products.
ACCESSORIES SUPPLIED: 2 fixing screws.

CHARACTERISTICS: clip fixing on DIN perforated front panels.

APPLICATIONS: for boards 46QP, QX, QM e CEP.

APPLICATIONS: for boards 46QP, QX, QM e CEP.

ACCESSORIES SUPPLIED: 2 keys.
NOTES: All the keys and relative locks with the same product code are identical.