Sdílet

RESTART RM - TO BE COUPLED WITH MDC - 2 POLES - 1P+N/2P Idn=0,03 A 230 V - 1 MODULE EN 50022

Kód: GWD0991

Řada: 90 ReStart Range
Automatic reclosing devices

In the event the switch trips, the ReStart devices, after checking the system status, restore the power supply thereby ensuring maximum continuity of service in complete safety.
Available for both residual current circuit breakers and residual current circuit breakers with overcurrent protection, the range is characterized by the Autotest functions, with periodic and automatic control of the residual current protection without interrupting the power supply and PRO with extended control of the system.

Technické informace

Informace

Stáhnout

Certifikáty

Description Automatic reclosing device

Code ReStart Rm 2P

Suitable for RCBO's MDC - 1P+N/2P - 30 mA

Rated voltage AC 230 V

Rated current 6 - 10 - 13 - 16 - 20 -25 - 32 A

No. modules 1

Standard EN 50557

Rated frequency (Hz) 50 - 60 Hz

Distribution system TT - TN-S

Rated non-operating resistance between live parts and earth (Rdo) 8kΩ

Insulation voltage (Ui) 500 V

Rated operating resistance between live parts and earth (Rd) 16 kΩ

Rated impulse withstand voltage (Uimp) 4 kV

Maximum operating frequency 30 oper./h

Overvoltage category III

Mechanical endurance 4000

Dielectric strength test voltage between pole and earth 2500 Vac for 1 minute

Type of residual current protection AC - A - A[IR] - F

Rated residual operating current 30 mA

Operating temperature -5°C ÷ +40°C

Stocking temperature -40°C ÷ +70°C

Automatic reclosure for untimely tripping Yes

Earth failure test Yes

Continuous system monitoring No

Number of poles 2P

Electrocod 1414

Ware Number 85362010

Product Data Sheet

User guide

Technical characteristics - IT

Technical characteristics - DE

Technical characteristics - EN

Technical characteristics - ES

Přejít do oblasti pro stahování Přejít do oblasti pro stahování

Reach Declaration

Conformity declaration

CE marking

VYBAVENÍ A POZNÁMKY

CHARACTERISTICS: after RCBO has tripped, ReStart checks the insulation and the short circuit prior to the automatic reclosure. In the event of a fault (earth leakage or short circuit), ReStart will not reset the circuit breaker.
NOTE: the ARD must be supplied at 230 Vac phase-neutral.