RESTART RD PRO - TO BE COUPLED WITH RCCB'S IDP 2 POLES - Idn=0,03 A 230 V - 1 MODULE EN 50022

Code: GWD0976

Range: 90 ReStart Range
Automatic reclosing devices

In the event the switch trips, the ReStart devices, after checking the system status, restore the power supply thereby ensuring maximum continuity of service in complete safety.
Available for both residual current circuit breakers and residual current circuit breakers with overcurrent protection, the range is characterized by the Autotest functions, with periodic and automatic control of the residual current protection without interrupting the power supply and PRO with extended control of the system.

Technical Info

Information

Download

Software

Certificates

Description Automatic reclosing device

Code ResStart Rd PRO 2P

Suitable for IDP RCCBs - 2P up to 80 A - 30 mA

Rated voltage AC 230 V

Rated current 25 - 40 - 63 - 80 - 100 A

Rated current 0 A

No. modules 1

Standard EN 50557

Rated frequency (Hz) 50 - 60 Hz

Distribution system TT - TN-S

Rated non-operating resistance between live parts and earth (Rdo) 8kΩ

Insulation voltage (Ui) 500 V

Rated operating resistance between live parts and earth (Rd) 16 kΩ

Rated impulse withstand voltage (Uimp) 4 kV

Maximum operating frequency 30 oper./h

Overvoltage category III

Mechanical endurance 4000

Dielectric strength test voltage between pole and earth 2500 Vac for 1 minute

Type of residual current protection AC - A - A[IR] - F

Rated residual operating current 30 mA

Operating temperature -5 +60 °C

Stocking temperature -40°C ÷ +70°C

Automatic reclosure for untimely tripping Yes

Earth failure test Yes

Continuous system monitoring Yes

Completeable
with GWD0951 Auxiliary contact - GW90992 RS485 BUS Module

Number of poles 2P

Electrocod 1414

Ware Number 85362010

Product Data Sheet

Technical characteristics - IT

Technical characteristics - DE

Technical characteristics - EN

Technical characteristics - ES

User guide

Go to download area Go to download area

RESTART

Automatic reclosing devices ReStart

PROJEX

Low voltage system design

RESTART WIFI

APP for monitoring the electrical system with Restart

PBT-Q

Low voltage systems and boards

CADpro

Advanced design of electrical systems

PRICE

Estimation of electrical systems

Go to software area Go to software area

Reach Declaration

Conformity declaration

Display the certificate

CE marking

EQUIPMENT AND NOTES

CHARACTERISTICS: after RCCB has tripped, ReStart checks the insulation prior to the automatic reclosure. In the event of a fault (earth leakage), ReStart will not reset the circuit breaker but will continue to monitor the circuit every 2 minutes reclosing the circuit breaker when safe to do so.
Compatible with:
-GWD0951 auxiliary contact
-GW90992 ModBus RS485 interface module (only if already coupled with GWD0951 auxiliary contact)
NOTES: cannot be used with 4P RCCBs in 3 modules and type B RCCBs. The ARD must be supplied at 230 Vac phase-neutral.