CONNCTED AXIAL DIMMER MODULE - ZIGBEE - 100-240 V ac 50/60 Hz - 4-150W 240 VAC - 2 MODULES - CHORUSMART
Code:
GWA1222
Range: Connected SMART HOME
Connected Smart Home system
Connected Smart Home system
The connected system, based on the Zigbee wireless protocol, offers a full range of solutions for smart homes and small offices that are suitable for both new buildings and renovations.
It enables you to control safety, comfort and consumption, through a unique user experience, using the Home Gateway APP and EGO Smart plates. The system integrates with the Google Home IoT platforms, Amazon Alexa and IFTTT, and all functions can be controlled with Google and Alexa voice assistants.
It enables you to control safety, comfort and consumption, through a unique user experience, using the Home Gateway APP and EGO Smart plates. The system integrates with the Google Home IoT platforms, Amazon Alexa and IFTTT, and all functions can be controlled with Google and Alexa voice assistants.
IP20 (with button key)
Technical Info
Information
Download
Software
Video
Certificates
Power supply
100 ÷ 240 V ac - 50/60 Hz
Power
4-150 W 240 V ac
No. modules
2
No. output channels
1
Radio connections
Zigbee (IEEE 802.15.4)
Standard
2014/53/EU, 2011/65/EU + 2015/863, EN 60669-2-1, EN 60669-1, EN 301 489-1, EN 301 489-17, EN 300 328, EN IEC 63000
Working temperature
-5 ÷ +45 °C
Relative humidity (non-condensative)
Max 93%
Power output Zigbee
10 dBm
Dispersible max power (W)
5,7
Wiring terminals
With screw
Terminal tightening capacity
stranded cables (mm²) Max. 1,5
stranded cables (mm²) Max. 1,5
Terminal tightening capacity
solid cables (mm²) Max. 1,5
solid cables (mm²) Max. 1,5
Category
Dimmers
No. input channels
2 (for local command replication or sending additional Zigbee commands)
Input voltage
Mains supply voltage
IP degree
IP20 (with button key)
240 V ac Incandescent-halogen lamps
4-150 W
240 V ac LED lamps
4-150W (max 10 lamps)
Loads piloted from electronic transf. 240 V ac
4-150 VA
LED colour
Blue
Local control
Via 2 front push buttons (to complete with button key)
Zigbee control extension if installed in an EGO SMART plate (SHIFT function)
Yes (2 Zigbee command activated with front push buttons)
Load control
Trailing edge
Ware Number
85365080
EQUIPMENT AND NOTES
CHARACTERISTICS: devices for the control of 1 dimmable lighting device. Suitable for incandescent, halogen, LED and fluorescent lamps (240Vac): 4-150W, halogen lamps powered by electronic transformers (240Vac): 4-150VA. Trailing edge load driver mode.
Two axial-operated local buttons for dimming the lamp connected to the device.
Equipped with 2 inputs (auxiliary axial controls, traditional push-buttons and switches, sensors, etc.) to replicate the local control of the lamp or to send Zigbee commands and statuses.
The devices are equipped with two blue LEDs that can be configured to facilitate localisation at night or to display the local load status.
APPLICATIONS: Control of the dimmable lamp connected to the devices via local push-buttons. The lamp can also be controlled via Zigbee by other devices connected to the network (control unit, scenarios). The inputs can be used to add control points for the local lamp connected to the device, Zigbee commands to other actuators (on/off control and lamp dimming, roller-shutter and Venetian blind control, generic load command, scenarios) or to send sensor statuses over the Zigbee network.
Use of these devices in conjunction with the EGO SMART plate enables 2 additional Zigbee commands to be sent. These can be activated with the push-buttons on the device when the “SHIFT” feature is enabled from the SMART plate.
NOTES: The devices must be completed with a front button key: GWA1221 must be completed with the GW1x553S or GW1x557S button keys; GWA1222 must be completed with the GW1x554S or GW1x558S button keys.
Two axial-operated local buttons for dimming the lamp connected to the device.
Equipped with 2 inputs (auxiliary axial controls, traditional push-buttons and switches, sensors, etc.) to replicate the local control of the lamp or to send Zigbee commands and statuses.
The devices are equipped with two blue LEDs that can be configured to facilitate localisation at night or to display the local load status.
APPLICATIONS: Control of the dimmable lamp connected to the devices via local push-buttons. The lamp can also be controlled via Zigbee by other devices connected to the network (control unit, scenarios). The inputs can be used to add control points for the local lamp connected to the device, Zigbee commands to other actuators (on/off control and lamp dimming, roller-shutter and Venetian blind control, generic load command, scenarios) or to send sensor statuses over the Zigbee network.
Use of these devices in conjunction with the EGO SMART plate enables 2 additional Zigbee commands to be sent. These can be activated with the push-buttons on the device when the “SHIFT” feature is enabled from the SMART plate.
NOTES: The devices must be completed with a front button key: GWA1221 must be completed with the GW1x553S or GW1x557S button keys; GWA1222 must be completed with the GW1x554S or GW1x558S button keys.
services
Do you need technical assistance?
Contact us to get the answers to your questions: plant, regulatory or product questions.
Find Gewiss
Are you looking for an installer or a sales point?
Find your trusted dealer or installer.
A new home for the Lighting catalogue!
This product is no longer hosted on this website. It can now be found at PERFORMANCE iN LIGHTING | Powered by Gewiss: Go to the website
You can enter the Gewiss world by consulting the sites available for each country, differentiated by language, services, and catalogue offerings
Choose your country
