RESTART RD PRO - TO BE COUPLED WITH RCCB'S IDP - 2/4P UP TO 63A Idn=0,1-0,3-0,5A - 230 V - 3 MODULES EN 50022

Code: GW90969

Range: 90 ReStart Range
Automatic reclosing devices

In the event the switch trips, the ReStart devices, after checking the system status, restore the power supply thereby ensuring maximum continuity of service in complete safety.
Available for both residual current circuit breakers and residual current circuit breakers with overcurrent protection, the range is characterized by the Autotest functions, with periodic and automatic control of the residual current protection without interrupting the power supply and PRO with extended control of the system.

Technical Info

Information

Download

Software

Certificates

Description Automatic reclosing device

Code ReStart Rd PRO 4P

Suitable for IDP RCCBs - 2P/4P up to 63 A - 100/300/500 mA

Rated voltage AC 230 V

Rated current 25 - 40 - 63 - 80 - 100 A

Rated current 0 A

No. modules 3

Standard EN 50557

Rated frequency (Hz) 50Hz

Distribution system TT - TN-S

Rated non-operating resistance between live parts and earth (Rdo) 2,5 kΩ

Insulation voltage (Ui) 500 V

Rated operating resistance between live parts and earth (Rd) 5 kΩ

Rated impulse withstand voltage (Uimp) 4 kV

Maximum operating frequency 30 oper./h

Overvoltage category III

Mechanical endurance 4000

Dielectric strength test voltage between pole and earth 2500 Vac for 1 minute

Type of residual current protection AC - A - A[IR] - A[S] - F - B

Rated residual operating current 100/300/500 mA

Operating temperature -25 +60 °C

Stocking temperature -40°C ÷ +70°C

Type of contacts Photomos (potential free)

Voltage operating 5-230 V ac/dc

Current operating 0.6mA (min)-100mA cosφ=1 (max)

Operating frequency 50 Hz

Use category AC12

Operating modes NO/NC/NO with handle position signalling function

Rated tightening torque 0,4 Nm

Terminal section ≤ 2,5 mm²

Automatic reclosure for untimely tripping Yes

Earth failure test Yes

Continuous system monitoring Yes

Completeable
with GWD0951 Auxiliary contact - GW90992 RS485 BUS Module

Number of poles 2P/4P

Electrocod 1414

Ware Number 85362010

Product Data Sheet

User guide

Technical characteristics - IT

Technical characteristics - DE

Technical characteristics - EN

Technical characteristics - ES

Go to download area Go to download area

CADpro

Advanced design of electrical systems

RESTART

Automatic reclosing devices ReStart

CENTRAL

Quotation and Thermal test of modular enclosures

PROJEX

Low voltage system design

PBT-Q

Low voltage systems and boards

PRICE

Estimation of electrical systems

Go to software area Go to software area

Reach Declaration

Conformity declaration

Display the certificate

CE marking

EQUIPMENT AND NOTES

CHARACTERISTICS: after RCCB has tripped, ReStart checks the insulation prior to the automatic reclosure. In the event of a fault (earth leakage), ReStart will not reset the circuit breaker but willcontinue to monitor the circuit every 2 minutes reclosing the circuit breaker when safe to do so. In the meantime the integrated configurable auxiliary contact will change state to indicate thatthe automatic reset did not take place.
Compatible with:
-GW90992 ModBus RS485 interface module.
NOTES: they cannot be used with 4P RCCBs in 3 modules. 230 V ac power supply, phase-neutral.