CONNECTED AXIAL ROLLER SHUTTER MODULE - ZIGBEE - 100-240 V ac 50/60 Hz - 1 MODULE - CHORUSMART
Code:
GWA1231
Range: Connected SMART HOME
Connected Smart Home system
Connected Smart Home system
The connected system, based on the Zigbee wireless protocol, offers a full range of solutions for smart homes and small offices that are suitable for both new buildings and renovations.
It enables you to control safety, comfort and consumption, through a unique user experience, using the Home Gateway APP and EGO Smart plates. The system integrates with the Google Home IoT platforms, Amazon Alexa and IFTTT, and all functions can be controlled with Google and Alexa voice assistants.
It enables you to control safety, comfort and consumption, through a unique user experience, using the Home Gateway APP and EGO Smart plates. The system integrates with the Google Home IoT platforms, Amazon Alexa and IFTTT, and all functions can be controlled with Google and Alexa voice assistants.
IP20 (with button key)
Technical Info
Information
Download
Software
Video
Certificates
Output contacts
2,3 A 240 V ac (according to IEC 60669-2-1)
Power supply
100 ÷ 240 V ac - 50/60 Hz
No. modules
1
No. output channels
1
Radio connections
Zigbee (IEEE 802.15.4)
Standard
2014/53/EU, 2011/65/EU + 2015/863, EN 60669-2-1, EN 60669-1, EN 301 489-1, EN 301 489-17, EN 300 328, EN IEC 63000
Working temperature
-5 ÷ +45 °C
Relative humidity (non-condensative)
Max 93%
Power output Zigbee
10 dBm
Dispersible max power (W)
2
Wiring terminals
With screw
Terminal tightening capacity
stranded cables (mm²) Max. 1,5
stranded cables (mm²) Max. 1,5
Terminal tightening capacity
solid cables (mm²) Max. 1,5
solid cables (mm²) Max. 1,5
Category
Axial roller shutter command connected
No. input channels
2 (for local command replication or sending additional Zigbee commands)
Input voltage
Mains supply voltage
IP degree
IP20 (with button key)
LED colour
Blue
Local control
Via 2 front push buttons (to complete with button key)
Power supply of EGO SMART plate
Yes
Zigbee control extension if installed in an EGO SMART plate (SHIFT function)
Yes (2 Zigbee command activated with front push buttons)
Ware Number
85389099
EQUIPMENT AND NOTES
CHARACTERISTICS: devices for controlling a motor for roller shutters, curtains, venetian blinds, roller blinds, etc., via 2 interlocked output contacts. Two local push buttons with axial activation enable operation of the motor connected to the device.
Equipped with 2 inputs (auxiliary axial commands, traditional switches and push buttons, sensors etc.) to replicate local control of the motor or for sending ZigBee commands and status.
The devices are equipped with two blue LEDs that can be configured to facilitate localisation at night or to indicate the motor operation in progress and are designed to supply power to the EGO SMART plate within which they are housed.
APPLICATIONS: control of 1 motor connected to the device via local push buttons. The motor can also be controlled via ZigBee by other devices connected to the network (up/down commands, scenarios). Using the inputs, it is possible to add local motor-control points connected to the device, ZigBee commands to other actuators (on/off and lamp dimming control, roller shutter and venetian blind control, generic load control, scenarios) or send sensor status over the ZigBee network.
Using this device in combination with the EGO SMART plate, 2 further ZigBee commands can be sent, activated via the push buttons on the device when the SMART plate has the "SHIFT" function enabled.
NOTES: the devices must be completed with a front push button: GWA1231 must be completed with push buttons GW1x553S or GW1x557S; GWA1232 must be completed with push buttons GW1x554S or GW1x558S.
Equipped with 2 inputs (auxiliary axial commands, traditional switches and push buttons, sensors etc.) to replicate local control of the motor or for sending ZigBee commands and status.
The devices are equipped with two blue LEDs that can be configured to facilitate localisation at night or to indicate the motor operation in progress and are designed to supply power to the EGO SMART plate within which they are housed.
APPLICATIONS: control of 1 motor connected to the device via local push buttons. The motor can also be controlled via ZigBee by other devices connected to the network (up/down commands, scenarios). Using the inputs, it is possible to add local motor-control points connected to the device, ZigBee commands to other actuators (on/off and lamp dimming control, roller shutter and venetian blind control, generic load control, scenarios) or send sensor status over the ZigBee network.
Using this device in combination with the EGO SMART plate, 2 further ZigBee commands can be sent, activated via the push buttons on the device when the SMART plate has the "SHIFT" function enabled.
NOTES: the devices must be completed with a front push button: GWA1231 must be completed with push buttons GW1x553S or GW1x557S; GWA1232 must be completed with push buttons GW1x554S or GW1x558S.
services
Do you need technical assistance?
Contact us to get the answers to your questions: plant, regulatory or product questions.
Find Gewiss
Are you looking for an installer or a sales point?
Find your trusted dealer or installer.
A new home for the Lighting catalogue!
This product is no longer hosted on this website. It can now be found at PERFORMANCE iN LIGHTING | Powered by Gewiss: Go to the website
You can enter the Gewiss world by consulting the sites available for each country, differentiated by language, services, and catalogue offerings
Choose your country
