RESTART RM PRO - TO BE COUPLED WITH MDC - 2 POLES - 1P+N/2P Idn=0,1-0,3 A 230 V - 1 MODULE EN 50022
Code:
GWD0998
Range: 90 ReStart Range
Automatic reclosing devices
Automatic reclosing devices
In the event the switch trips, the ReStart devices, after checking the system status, restore the power supply thereby ensuring maximum continuity of service in complete safety.
Available for both residual current circuit breakers and residual current circuit breakers with overcurrent protection, the range is characterized by the Autotest functions, with periodic and automatic control of the residual current protection without interrupting the power supply and PRO with extended control of the system.
Available for both residual current circuit breakers and residual current circuit breakers with overcurrent protection, the range is characterized by the Autotest functions, with periodic and automatic control of the residual current protection without interrupting the power supply and PRO with extended control of the system.
Technical Info
Information
Download
Software
Certificates
Description
Automatic reclosing device
Code
ReStart Rm PRO 2P
Suitable for
RCBO's MDC - 1P+N/2P - 100-300 mA
Rated voltage AC
230 V
Rated current
6 - 10 - 16 - 20 -25 - 32 A
No. modules
1
Standard
EN 50557
Rated frequency (Hz)
50 - 60 Hz
Distribution system
TT - TN-S
Rated non-operating resistance between live parts and earth (Rdo)
2,5 kΩ
Insulation voltage (Ui)
500 V
Rated operating resistance between live parts and earth (Rd)
5 kΩ
Rated impulse withstand voltage (Uimp)
4 kV
Maximum operating frequency
30 oper./h
Overvoltage category
III
Mechanical endurance
4000
Dielectric strength test voltage between pole and earth
2500 Vac for 1 minute
Type of residual current protection
AC - A - A[S]
Rated residual operating current
300 mA
Operating temperature
-5 +60 °C
Stocking temperature
-40°C ÷ +70°C
Automatic reclosure for untimely tripping
Yes
Earth failure test
Yes
Continuous system monitoring
Yes
Completeable
with GWD0951 Auxiliary contact - GW90992 RS485 BUS Module
with GWD0951 Auxiliary contact - GW90992 RS485 BUS Module
Number of poles
2P
Electrocod
1414
Ware Number
85362010
EQUIPMENT AND NOTES
CHARACTERISTICS: after RCBO has tripped, ReStart checks the insulation and the short circuit prior to the automatic reclosure. In the event of a fault (earth leakage), ReStart will not reset the circuit breaker but will continue to monitor the circuit every 2 minutes reclosing the circuit breaker when safe to do so.
Compatible with:
-GWD0951 auxiliary contact
-GW90992 ModBus RS485 interface module (only if already coupled with GWD0951 auxiliary contact).
NOTE: the ARD must be supplied at 230 Vac phase-neutral.
Compatible with:
-GWD0951 auxiliary contact
-GW90992 ModBus RS485 interface module (only if already coupled with GWD0951 auxiliary contact).
NOTE: the ARD must be supplied at 230 Vac phase-neutral.
services
Do you need technical assistance?
Contact us to get the answers to your questions: plant, regulatory or product questions.
Find Gewiss
Are you looking for an installer or a sales point?
Find your trusted dealer or installer.
You can enter the Gewiss world by consulting the sites available for each country, differentiated by language, services, and catalogue offerings
Choose your country
