Chorus - Security RF burglar alarm system

CHARACTERISTICS: burglar alarm control unit for connecting both wired and wireless devices. The control unit has 8 single/double-balancing inputs for connecting wired devices (can be expanded to 16 in simple/expanded split mode). The control unit can manage up to 64 inputs, both wired (via an internal terminal block and wired input expansion modules GW10946) and wireless. Surface-mounting (protrusion = 6cm) or flush-mounting (protrusion = 3.5cm) using the GW10950 box. Max. number of connection devices managed = 16. CD with special configuration software included. To obtain additional optional functions, you can use specific IESS modules (for further information, go to www.iessonline.com).
NOTES: 1 Ni-MH battery pack included - 12V - 2.1 Ah.

KIT COMPOSITION:
1 control unit GW10931,
1 two-way remote control GW10933,
2 surface-mounting IR detectors GW10942,
1 external siren GW10937.
CHARACTERISTICS: the kit allows you to create a basic system; it can be expanded using the components of the burglar alarm system.

CHARACTERISTICS: to be used in combination with the control unit GW10931 for flush-mounting installation.

CHARACTERISTICS: additional switching power supply with RS485 serial interface for control units. The power supply is housed in a metal enclosure (weight 2.7kg).
NOTES: internal space to accommodate a 12V - 17Ah battery (not included).

CHARACTERISTICS: GW10938 quad-band GSM/GPRS module with integrated antenna to be fixed inside the control unit, pre-arranged for sending SMS and vocal alarm messages and remote baby monitoring. GW10939 module for connection to the telephone line: it includes a telephone dialler with an integrated modem for transmitting the alarms via Contact-ID to the surveillance institutes or other control centres, sending vocal alarm messages via the telephone line, control of the control unit via a telephone or cell phone and remote baby monitoring.
NOTE: the modules must be housed in the GW10931 control unit, from which the power supply is received.

CHARACTERISTICS: allows you to perform operations of activation/deactivation/partialisation, configuration (basic maintenance), control and diagnostics. Built-in transponder for use with electronic proximity key GW20474.

CHARACTERISTICS: used with an electronic proximity key GW20474.
Equipped with 4 LEDs for system status visualisation.

CHARACTERISTICS: used with an electronic proximity key GW20474. It has 4 LEDS for displaying system status and 4 front button keys (relative to the 4 of the selected area) to implement the required partialisations.

CHARACTERISTICS: 2 keys are used for total activation and deactivation, 2 keys for day/night partialisation, and 2 keys for controlling the programmable outputs. Anti-panic function. The 2-way remote control shows when the command has been received and implemented by the control unit GW10931.
NOTES: 1 battery CR2032 included

CHARACTERISTICS: when used in combination with the GW10934 touch keyboard or the GW1x935 and GW1x940 row activators, typing the access code can be avoided.

CHARACTERISTICS: alarm output with solid state relay - capacity 100mA.
NOTE: max. absorption 8 mA.

CHARACTERISTICS: adjustable mounting bracket included.
NOTES: 8mA max. absorption.

CHARACTERISTICS: dual technology detector, infrared and microwave. Swivel mounting bracket included.
NOTES: 13mA max. absorption

CHARACTERISTICS: double technology detector, infrared and microwave, curtain effect for the protection of doors/windows or blinds/shutters. Can be installed horizontally or vertically.
NOTES: 40mA max. absorption.

NOTES: powered by 1 lithium battery, included: 3.6 V - 1.2 Ah type ER14250 or LS14250. Average battery life: 2.5 years. adjustable fixing bracket included.

CHARACTERISTICS: magnet size BxHxD (mm) 48x16x16.
NOTES: powered by 1 lithium battery, included: 3.6V - 1.2Ah, type ER14250 or LS14250.

CHARACTERISTICS: module with 2 NC inputs that can be associated with 2 radio transmitters, which can be encoded separately: the first input is used for wired connection of magnetic contacts only; the second input is used for connecting sensors for shutters (or alternatively it can be set as an additional wired input for magnetic contacts). The product has a “reed” reader, for direct use with the magnet (included). Magnet size BxHxD (mm) 47x15x18.5.
NOTES: Powered by 1 x 9V alkaline battery type 6LR61, included. Traditional connectable contacts: GW20491, GW20492, GW20493, GW20494, GW20495, GW20496.

CHARACTERISTICS: to be used in combination with the control unit GW10931, the RF input module GW20484, or the expansion module GW10946.

CHARACTERISTICS: to be used in combination with the GW10931 control unit, the GW20484 RF input module or the GW10946 expansion module. N.C. contacts with shutter/door closed.
GW20494, closing distance 15mm.
GW20496, connection with 2 cables of 35cm in length; closing distance in air: 16mm for wood and aluminium, 9mm for iron.
GW20495, connection with 4 cables of 60cm in length; closing distance in air: 19mm for wood and aluminium, 12mm for iron.

CHARACTERISTICS: to be used in combination with the GW10931 control unit, the GW20484 RF input module or the GW10946 expansion module. N.C. contacts with shutter/door closed.
Connection with 4 cables of 20cm in length.
GW20491 closing distance in air: 10mm for wood, 12mm for aluminium, not suitable for iron.
GW20492, closing distance in air: 20mm for wood and aluminium, 10mm for iron.

NOTE: max absorption 450 mA.

NOTES: 1 rechargeable battery 12V-1.2 Ah - not included.

NOTES: 1 lithium battery - 7.2 V - 13 Ah type LSH20 included.

CHARACTERISTICS: management of 8 inputs (triple-balancing, double-balancing, single-balancing) for quick inputs (e.g. roller shutters) or NC, and 8 electronic programmable outputs (signalling LEDs).
NOTES: max. absorption 35 mA (without wired outputs).

NOTE: absorption 12-47 mA.

NOTES: 3x9V 6LR61-type alkaline batteries included.

CHARACTERISTICS: interface between the KNX BUS and the control unit GW10931. To be configured with ETS software or with Easy Controller.
APPLICATIONS: allows you to manage the functions of the burglar alarm system (commands, alarm signalling, sensor status, faults, malfunctioning, system operations) via the KNX BUS.
NOTES: to be installed inside the GW10931 command units.